1. Go to right top corner, click on the down icon and in the drop-down list, select Settings
2. The Settings window opens up. Select the Network option on the left navigation. Click on the gear icon. This will open the network configuration.
3. Select click on the IPv4 tab.
4. Under IPv4 you can see the automatic (DHCP) is selected.
5. Select manual and change the IP address to what you wanted to configure, in my case I am going to configure.
6. For only DNS entries, select the switch button to turn off Automatic DNS and enter your static DNS in the field below.
7. Select Apply and your static IP and/or DNS should be set.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article